Loading..

Product was successfully added to your shopping cart.





Navigation

Jeio Tech Ductless Fume Hoods | Laboratory Fume Hoods

«

Jeio Tech Ductless Fume Hoods

Product Code : DFH-1 Brand: Jeio Tech
Product Name Qty
Jeio Tech Ductless Fume Hood (DLH-01G)
Jeio Tech Ductless Fume Hood (DLH-11G)

Jeio Tech's Ductless Fume Hoods provide laboratories with a safe and energy-saving mobile workspace free from toxic vapours and fumes without the need of costly ductwork.

Each ductless fume hood model comes with a high-quality polyester fibre pre-filter for trapping larger particles and increasing the life of the main HEPA filter. Their large-capacity blower maintains a sufficient intake flow rate and reduces noise (less than 50dB under normal operation).

The fume hood's internal airflow speed can also be easily monitored with their built-in anemometer.

Add to Quote List
Features

Performance:

• A variety of filters and work surfaces available to suit your experimental needs.
• High-quality polyester fibre pre-filter for trapping large particles and increasing the life of the main HEPA filter.
• Large-capacity blower maintaining sufficient intake flow rate and reducing noise (less than 55dB under normal operation).
• Fluorescent light installed outside the workspace in order to prevent the airflow hindrance as well as the contamination while maintaining illumination intensity. 

Convenience:

• Easy monitoring of the internal airflow speed thanks to built-in anemometer.
• Comfortable front access to cartridge type of filters for easy replacement.
• Built-in utility hole for easily routing the cords or wires of the equipment placed inside the hood.
• Fully or half openable front door for convenient transport of experimental apparatuses and equipment into or out of the workspace. 

Standards Compliance:

• Efficiency and capacity of activated carbon filters: BS 7989:2001.
• Structure, electrical outlet, lighting, and sound level: BS 7258-1:1994.
• Local smoke, large volume visualisation, face velocity, and tracer gas: ANSI/ASHRAE 110-1995 and NF EN 14175-1. 

Specifications

Fume Hood Type:

Ductless

Permissible Environmental Condition (°C):

Temperature: 5° to 40°, Maximum Relative Humidity: 80%, Altitude up to 2000m

Controller:

Microprocessor control

Face Velocity:

Initial set point: 0.4m/s, 80fpm

Air Flow Meter:

Swing vane type

Main Filter:

Chemical Filter (optional 6 different filters)

Pre Filter:

Washable high efficiency nylon filter

Material(s):

Main Body and Window (front/side): 2.0mm steel (epoxy powder-coated), 8mm/6mm thick acrylic resin

Work Surface: Optional 6 different work surfaces

Fluorescent Light Intensity:

> 600lux

Noise Level:

55dB under normal operation

Dimensions:

Internal (w x d x h): 880 x 640 x 800mm (DLH-01G) and 1180 x 640 x 800mm (DLH-11G)

External - without stand (w x d x h): 990 x 660 x 1250mm (DLH-01G) and 1200 x 660 x 1250mm (DLH-11G)

External - with stand (w x d x h): 900 x 660 x 1985mm (DLH-01G) and 1200 x 660 x 1985mm (DLH-11G)

Net Weight - body (kg): 100 (DLH-01G) and 118 (DLH-11G)

Net Weight - body and stand (kg): 120 (DLH-01G) and 140 (DLH-11G)

Electrical Requirements (230V):

50Hz, 0.6A

Downloads

Ask a question

Jeio Tech Ductless Fume Hoods
«